Filter
Top Products
Operations Using the Remote RM-PP65
39
US
HT-DDW650 4-244-183-71(1) US
To reset a button to its factory
setting
Repeat the above procedure.
To reset all the input selector
buttons to their factory setting
Press ?/1, AV ?/1 and MASTER VOL – at
the same time.
Controlling other TVs with
the remote commander
The remote commander is pre-programmed to
control non-Sony TVs. If your TV is listed in
the following table, set the appropriate
manufacturer’s code number.
1 Hold down TV ?/1 and enter your TV’s
code number using the number buttons.
Then release TV ?/1.
Now you can use the TV ?/1, VOL +/–,
CH +/–, TV/VIDEO and WIDE buttons to
control your TV.
Code numbers of controllable TVs
If there is more than one code number listed,
try entering them one at a time until you find
the one that works with your TV.
TV Maker Code(s)
SONY 01
AKAI 04
AOC 04
CENTURION 12
CORONADO 03
CURTIS-MATHES 12
DAYTRON 12
EMERSON 03, 04, 14
FISHER 11
GENERAL ELECTRIC 06, 10
GOLD STAR 03, 04, 17
HITACHI 02, 03
J.C.PENNEY 04, 12
JVC 09
KMC 03
MAGNAVOX 03, 08, 12
MARANTZ 04, 13
MGA/MITSUBISHI 04, 12, 13, 17
NEC 04, 12
PANASONIC 06, 19
PHILCO 03, 04
PHILIPS 08
PIONEER 16
PORTLAND 03
QUASAR 06, 18
RADIO SHACK 05, 14
RCA 04, 10
SAMPO 12
SANYO 11
SCOTT 12
SEARS 07, 10, 11
SHARP 03, 05, 18
SYLVANIA 08, 12
TEKNIKA 03, 08, 14
TOSHIBA 07
WARDS 03, 04, 12
YORX 12
ZENITH 15
Notes
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the batteries of the remote
commander, the code number may change. Set the
appropriate code number every time you replace the
batteries.