Filter
Top Products
Basic Operations
21
US
HT-DDW650 4-244-183-71(1) US
Basic Operations
Selecting the component
Input Selector buttons
Press the input selector button to select the
component you want to use.
To select Press
DVD PLAYER/VIDEO DVD
CASSETTE RECORDER
(DVD mode)
DVD PLAYER/VIDEO VIDEO 1
CASSETTE RECORDER
(VIDEO mode)
Other VCR VIDEO 2
MD or Tape deck MD/TAPE
CD player CD
Built in tuner TUNER FM/AM
After turning on the component you selected,
select the component and play the program
source.
• After selecting DVD PLAYER/VIDEO
CASSETTE RECORDER, VCR or DVD
player, turn on the TV and set the TV’s video
input to match the component you selected.
INPUT MODE
Press INPUT MODE to select the input mode
for your digital components.
Each time you press the button, the input mode
of the currently selected component switches.
Select To
AUTO IN Give priority to digital
signals when there are both
digital and analog
connections. If there are no
digital signals, analog is
selected.
COAX IN Specify the digital audio
signals input to the
DIGITAL COAXIAL input
jacks.
Select To
OPT IN Specify the digital audio
signals input to the
DIGITAL OPTICAL input
jacks.
ANALOG Specify the analog audio
signals input to the AUDIO
IN (L/R) jacks.
Note
When the 96 kHz digital signal is input, the tone,
sound field and effect level do not function.
MUTING
Press MUTING on the remote to mute the
sound. Press again to cancel the muting
function. The muting function is also canceled
when you turn the power on or turn the
MASTER VOLUME to turn the volume up.
PHONES
Use to connect headphones.
• When the headphones are connected, speaker
output is automatically canceled and “SP” do
not light up in the display.