Filter
Top Products
20
US
HT-DDW650 4-244-183-71(1) US
LEVEL
POWER
POWER indicator
Listening to the sub woofer
First, turn down the volume on the receiver.
The volume should be set to minimum before
you begin playing the program source.
1 Turn on the receiver and select the
program source.
2 Press POWER on the sub woofer.
The POWER indicator on the sub woofer
lights up in green.
3 Play the program source.
Adjusting the sound
Slight adjustments to the system can enhance
your sound enjoyment.
Adjusting the sub woofer
1 Rotate LEVEL to adjust the volume.
Set the volume level to best suit your
preference according to the program source.
Note
Do not turn the volume of the woofer to maximum.
Extraneous noise may be heard.
Checking the connections
After connecting all of your components to the
receiver, do the following to verify that the
connections were made correctly.
1 Press ?/1 to turn on the receiver.
2 Turn on the component that you
connected (e.g., CD player or tape
deck).
3 Press the input selector button (e.g.,
CD or MD/TAPE) to select the
component (program source).
4 Start playing.
If you do not obtain normal sound output after
performing this procedure, see
“Troubleshooting” on page 40 and take the
appropriate measures to correct the problem.
Multi channel surround setup
(continued)