Filter
Top Products
Settings and Adjustments
87
US
Be sure to change the value in the Setup Display
when you move the speakers.
* When you perform the Quick Setup (page 36), the
default settings are changed.
• When you set the distance, the sound cuts off for a
moment.
• If all front and surround speakers are not placed at an
equal distance from your listening position, set the
distance according to the closest speaker.
• Do not place the surround speakers farther away from
your listening position than the front speakers.
• Depending on the input stream, the [DISTANCE]
setting may not be effective.
x [LEVEL (FRONT)]
You can vary the level of front speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
x [LEVEL (SURROUND)]
You can vary the level of surround speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
(This settings appear except when you set
[SURROUND] to [NONE] in the [SIZE]
setting.)
To adjust the volume of all the
speakers at one time
Press VOLUME +/– on the system, or press
VOLUME +/– on the remote.
x [TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
Adjusting the speaker level by
using the test tone
1 Press DISPLAY when the system is
in stop mode.
[FRONT]
3.0 m/10 ft
*
Front speaker distance from the
listening position can be set in 0.2
meter (1 ft) increments from 1.0 to
7.0 meters (4 to 23 ft).
[CENTER]
3.0 m/10 ft
*
(appears when
you set
[CENTER] to
[YES] in the
[SIZE] setting.)
Center speaker distance from the
listening position can be set in 0.2
meter (1 ft) increments from 0.0 to
7.0 meters (0 to 23 ft).
[SURROUND]
3.0 m/10 ft
*
(appears except
when you set
[SURROUND]
to [NONE] in the
[SIZE] setting.)
Surround speaker distance from the
listening position can be set in 0.2
meter (1 ft) increments from 0.0 to
7.0 meters (0 to 23 ft).
Note
1.0 - 7.0 m/
4 - 23 ft
0.0 - 7.0 m/
0 - 23 ft
[L]
0 dB
Set this between –6 dB and 0 dB
in 1 dB increments.
[R]
0 dB
Set this between –6 dB and 0 dB
in 1 dB increments.
[CENTER]
0 dB
(appears when you
set [CENTER] to
[YES] in the [SIZE]
setting.)
Set this between –6 dB and +6 dB
in 1 dB increments.
[SUBWOOFER]
0 dB
Set this between –6 dB and +6 dB
in 1 dB increments.
[L]
0 dB
Set this between –6 dB and +6 dB in
1 dB increments.
[R]
0 dB
Set this between –6 dB and +6 dB in
1 dB increments.
[OFF]
The test tone is not emitted from the
speakers.
[ON]
The test tone is emitted from each speaker
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.
continued