Filter
Top Products
Getting Started
29
US
either of the above conditions is not met.
x INTERLACE
Select this setting when:
– your TV does not accept progressive signals, or,
– your TV is connected to jacks other than the COMPONENT VIDEO OUT jacks (MONITOR
OUT (VIDEO/S VIDEO)).
About DVD software types and the conversion method
DVD software can be divided into 2 types: film-based software and video-based software.
Video-based software is derived from TV, such as dramas and sit-coms, and displays images at 30
frames/60 fields per second. Film-based software is derived from film and displays images at 24 frames
per second. Some DVD software contains both video and film.
In order for these images to appear natural on your screen when output in progressive format, the
progressive signals need to be converted to match the type of DVD software that you are watching.
• When you play video-based software in progressive signal format, sections of some types of images may appear
unnatural due to the conversion process when output through the COMPONENT VIDEO OUT jacks. Even though
you set to “PROGRESSIVE AUTO” or “PROGRESSIVE VIDEO,” images from the MONITOR OUT (VIDEO or
S VIDEO) jack are unaffected as they are output in the interlace format.
Connecting the audio cords
Outputs TV sound through the speakers of this system.
To connect the AUDIO OUT jacks of a TV to the VIDEO 2 (AUDIO IN)
jacks of this system
Connect a TV to the VIDEO 2 (AUDIO IN) jacks using an audio cord (not supplied). When connecting
a cord, be sure to match the color-coded sleeves to the appropriate jacks on the components.
Note
R
AUDIO
OUT
L
COAXIAL IN
(DVD ONLY)
AUDIO IN
RL
RL
AUDIO IN
VIDEO IN
VIDEO IN
COAXIAL
AM
FM
75
SPEAKER
VIDEO 2
DIR-T1
VIDEO 2
COMPONENT VIDEO OUT
OUT
HDMI
MONITOR OUT
VIDEO 1
DIGITAL IN
OPTICAL
(DVD ONLY)
VIDEO
(DVD ONLY)
S VIDEO
YP
B
/C
B
P
R
/C
R
FRONT R FRONT L CENTER WOOFER
TV
To VIDEO 2
(AUDIO IN)
continued