Sony SCEH-00075 Headphones User Manual


  Open as PDF
of 20
 
4.3 Charging without the cradle
You can charge the headset directly from a USB device.
1 Check that the device the headset is to be connected to is turned on.
2 Insert the USB connector of the supplied USB cable into an available USB connector.
3 Insert the mini-B connector of the USB cable into the headset USB connector.
When power is first applied to the headset, the mic muting indicator lights up solid red for two seconds and
then flashes on and off until the headset is fully charged.
5. Pairing your headset
Before you can use the Wireless Headset with any device, such as a PS3™ system or a mobile phone, the
headset must be paired with the desired device.
You can pair your headset in either of two ways:
• Automaticmode(usingthesuppliedUSBcable)–theheadsetincludesavarietyofadvancedfeatures
forthePS3™systemwhichcanbeenabledbypairing(registering)theheadsetandthePS3™system
using automatic mode. Using automatic mode, you can pair the headset with any PS3™ system, but only
the most recently paired PS3™ system will be saved in the headset’s list of paired devices. For more
information, see “7.Connecting your headset to Bluetooth
® devices.”
• Bluetooth
® discovery mode – set up the headset as a standard Wireless Headset. Using Bluetooth®
discovery mode, you can pair the headset with many other Bluetooth® devices. The eight most
recently paired devices are saved in the headset’s list of paired devices. For more information,
see “7. Connecting your headset to Bluetooth® devices.”
Hints
The headset’s advanced features for the PS3™ system are available only when you use the automatic mode to pair
the headset with the PS3™ system.
Toaccesstheadvancedfeatures,thesystemsoftwareinuseonthePS3™systemmustbeversion2.50(orlater).
USB connector
PS3™ system
USB connector
mini-B connector
USB cable
Wireless Headset
1
2
3
 previous next