Filter
Top Products
Additional Information 37
Troubleshooting
General
Remedy
•
Press POWER to turn on the player.
• Connect the AC power cord to the AC IN socket
and a wall outlet securely.
• Make sure the batteries are inserted correctly.
• Replace all the batteries with new ones if they are
weak.
• Insert dry batteries. You cannot operate the player
on rechargeable batteries such as rechargeable Ni-
Cd batteries or rechargeable Ni-MH batteries.
• Adjust the volume.
• Unplug the headphones when listening through
speakers.
• Replace all the batteries with new ones.
• Replace all the batteries with new ones if they are
weak.
• Someone is using a portable telephone or other
equipment that emits radio waves near the player.
n Move the portable telephone, etc., away from the
player.
• The batteries are not fitted in the correct direction.
Re-insert the batteries correctly.
• Make sure that the CD compartment is closed.
• Place the CD with the label surface up.
• Clean the CD.
• Take out the CD and leave the CD compartment
open for about an hour to dry moisture
condensation.
• Press x on the CD section to switch the function of
the player to “Cd”.
• You cannot play CD-RW on the player.
• Reduce the volume.
• Clean the CD, or replace it if the CD is badly
damaged
• Place the player in a location free from vibration.
• The sound may drop out or noise may be heard if
the CD is recorded using a personal computer (CD-
R, etc.).
• Move the player away from the TV or radio.
CD Player
Symptom
There is no audio.
The power is turned off
automatically.
Unusual sound is heard.
The sound is noisy, weak or has
poor quality.
Noise is heard.
“bAttEry” and “CHECK” flashes
alternately in the display.
The CD does not play.
“no dISC“ lights in the display
even when a CD is in place.
The sound drops out.
When listening to the CD, the
TV or radio becomes noisy.
continued