Filter
Top Products
Basic Operations12
Recording on a tape (continued)
Tips
• Adjusting the volume or
the audio emphasis
(page 23) will not affect
the recording level.
• When or is
displayed, recording
will be made on both
sides of the tape. To
record on one side, press
DIR MODE to display
.
• If the AM radio makes a
whistling sound after
you’ve pressed z/X in
step 3, press MODE to
select the position that
most decreases the
noise.
• To record the first track
of the CD, press MODE
to display “1TRACK”,
then press CD DUB.
Use these buttons for additional operations
To Press
stop recording x on the tape section
pause recording z/X
(Only when you started Press the button again to
recording with z/X button.) resume recording.
turn on/off the player POWER
To erase a recording, proceed as follows:
1 Insert a tape you want to erase its recording into the tape
deck and press x on the tape section.
2 On the player: press z/X and then N.
On the remote: While keeping z/X pressed, press
TAPE N.
x
DIR MODE
MODE
POWER
z/X