Filter
Top Products
Setting Up 33
Setting Up
Tip
You can record the
sound of the connected
component. Insert a
blank tape into the tape
compartment, and
press z/X then N
(page 11).
TV, VCR, MiniDisc
player/recorder,
etc.
Rear panel of
this player
1 Remove the jack cover from the OPTICAL
DIGITAL OUT (CD) jack of this player and connect
the jack with the digital input jack of the MiniDisc
recorder or other component using the digital
connecting cable (not supplied) .
2 Turn on the power of this player and the connected
component.
3 Make the connected component ready for
recording.
4 Start playing a CD on this player.
Listening to TV, VCR and MiniDisc player/
recorder
1 Connect the LINE IN jack of this player with the
line output jack of the MiniDisc player or other
component using the audio connecting cable (not
supplied) .
2 Turn on the power of this player and the connected
component.
3 Press MD (LINE) and start playing sound on the
connected component.
The sound from the connected component is
output from the speakers.
Tip
To record a track from
a number of different
CDs, 1TRACK is useful
(page 19).
1 Make connections.
2 Turn on this player
and the connected
component.
3 Do steps 1 through 3
on page 19.
4 Make the connected
component ready for
recording.
5 Start playing a CD on
this player.
Notes
• As long as “Cd”
appears in the display,
the optical digital
output jack is in
operation and the jack
lights even if the CD is
in stop mode.
• If you play a CD-ROM
that is not for audio
use, noise may be
heard.
to LINE IN jack
to line
output jack
Audio connecting cable
For MiniDisc recorder:
RK-G136 (1.5 m) (not supplied)
For TV, VCR:
RK-G129 (1.5 m) (not supplied)
continued