Filter
Top Products
The Timer28
Timer-recording
radio programs
You can set timer to record the radio at
a certain time. Make sure you have set
the clock (see “Setting the clock” on page
24).
Before you begin, make sure the (clock) indication is
not lit in the display. If it is lit, press STANDBY.
1 Tune in the radio station and insert a blank tape
into the tape compartment with the side you want
to record on facing up.
2 Press DIR MODE to
select recording
direction of the tape.
3 Press TIMER to display the indication.
Do the following operations by checking the
display window.
4 Turn the jog dial to display “RAdIO” and “REC”,
and press ENTER•MEM.
Note
You cannot preset
recording timer and
waking up timer (page
25) at the same time.
Tips
• We recommend that
you use AC power as
the power source for
optimum recording
quality.
• When you receive the
AM program in step 1,
press z/X to check if
the noise is heard. If so,
press MODE to select
the position that most
decreases the noise.
Display
One side
Both sides
ENTER
MEM
TIMER
STANDBY DIR MODE
Jog dial