Filter
Top Products
37
24P (23.98P) Mode Settings
Chapter 2 Preparations
24P (23.98P) Mode
Settings
Selecting the Playback Mode
(23.98PsF or 2-3 Pulldown)
When the setup menu item SYSTEM FREQ is set to
“23.98P”, you can set monitor output to either 23.98PsF
mode or 2-3 pulldown mode.
1
Press the MENU button.
The system menu (see page 90) appears.
2
Press the M/MARK1 or m/MARK2 button to select
SETUP MENU.
3
Press the ,/OUT button.
The setup menu appears.
4
Press the M/MARK1 button to select
“OPERATIONAL FUNCTION”.
5
Press the ,/OUT button.
The second level of the OPERATIONAL FUNCTION
menu appears.
6
Press the M/MARK1 or m/MARK2 button to select
“SYSTEM SEL”.
7
Press the ,/OUT button.
The third level of the menu appears.
]
8
Press the M/MARK1 or m/MARK2 button to select
“SYSTEM FREQ”.
9
Press the ,/OUT button.
Setting values appear.
10
Press the m/MARK2 button to select “23.98P”.
11
If you want to change the monitor output setting as
well, press the </IN button to return to the higher
level screen (the state of step 7). If you do not want to
change the monitor output setting, proceed to step 15.
12
Press the m/MARK2 button to select “23.9P
OUTPUT”.
13
Press the ,/OUT button.
The setting value appears.
SETUP MENU
OPERATIONAL FUNCTION
DISPLAY CONTROL
TIME CODE
DISC PROTECTION
VIDEO CONTROL
AUDIO CONTROL
INTERFACE SELECT
METADATA
SETUP BANK OPERATION
MENU GRADE
:ENHAN
SETUP MENU
OPERATIONAL FUNCTION
REPEAT MODE
AUTO EE SELECT
LOCAL ENABLE
REC FORMAT
DISC END
CLIP TITLE
FILE NAMING
SYSTEM SEL
SEARCH ENABLE
VAR SPD LIMIT
:OFF
:STP&EJ
:SP
:EJECT
:DIAL
:OFF
SETUP MENU
OPERATIONAL FUNCTION
SYSTEM SEL
SYSTEM FREQ : 60I
UC/J : J
23.9P OUTPUT: PsF
SETUP MENU
OPERATIONAL FUNCTION
SYSTEM SEL
SYSTEM FREQ : 601
* 60I
50I
30P
25P
23.98P
SETUP MENU
OPERATIONAL FUNCTION
SYSTEM SEL
23.9P OUTPUT: PsF
* 23.98PsF
2-3 PULL DOWN