Sony MZ-N910 CD Player User Manual


 
88
SEL Group You selected “ : Name”, “ : Move”, or “ : Erase” while
the recorder is stopped or while playing a track that does not
belong to a group.
, Select a track within a group you want to edit, and then do the
editing operation again.
SEL Track • You selected “ : Name”, “ : Move”, or “ : Erase” after
playback has already finished or after END SEARCH was pressed,
and the recorder has stopped.
, Do the editing operation again after selecting the desired track
first.
SLOW CHG • You tried to charge at a place where the temperature is too low.
, Charge the battery at a temperature of +5°C (+41°F) to +40°C
(+104°F).
TEMP OVER Heat has built up in the recorder.
, Let the recorder cool down.
TOC Edit The MD player is recording information (track start and end
position) from the memory to the disk.
, Wait until this process is completed. Do not expose the player
to physical shock, nor disrupt power supply.
TOC ERR The recorder cannot read the disc information correctly.
, Insert another disc.
, If it is no problem to erase the entire disc, do so (page 44).
TR FULL Track number 254 has been reached.
, Erase unnecessary tracks (page 44).
TrPROTECT You tried to record or edit a track that is protected from erasing.
, Record or edit on other tracks.
You tried to edit a track that has been checked out from a
computer.
, Check the track back in to the computer and then edit.
Error message Meaning/Remedy