Filter
Top Products
41
7 Repeat step 6, and then enter all
characters of the label name.
8 Press the jog dial for 2 seconds or
more
.
A track or disc is labeled.
Note
When the recording is stopped while labeling a
track or a disc during recording, or when the
recording moves on to the next track while
labeling a track, the input at that point is entered
automatically.
Re-labeling
You can change the label of the disc or a
track by doing the procedure for
“Labeling a track or a disc (Name)”
(page 39).
To re-label a track:
Start playing the track you want to re-
label, and then change the track name
while the recorder is playing, or change
the track name while the recorder is
stopped and the track to be re-labeled is
currently selected.
To re-label a disc:
You can re-label the disc while the
recorder is stopped, recording, or playing.
To cancel labeling
Press x for 2 seconds or more.
To return the preceding
settings
Press x.
Notes
• The recorder is able to display, but cannot
label using Japanese “Katakana” characters.
• The recorder cannot rewrite a disc or track
name of more than 200 letters that was created
by another device.
For the remote control operation, see
page 65.
To move the cursor
from the letter
input area to the
character palette.
Press VOL –.
To move the cursor
from the character
palette to the letter
input area.
Press x.
To enter a name. Press the jog dial or
N for 2 seconds
or more.
To insert a blank
space before the
cursor.
Press END
SEARCH and VOL
+ at the same time.
To delete a letter. Press END
SEARCH and VOL
– at the same time.
To display “:”, “–”
or “/” at the input
position in the
letter input area.
Press X.
To switch capital
and small letters.
Press X.
To cancel labeling. Press x in the
letter input area.
1)
Functions of the buttons or the control may
differ depending on when the cursor is in the
letter input area or in the character palette.
Functions
1)
Operations