Sony MZ-N707 MiniDisc Player User Manual


 
55-GB
Erasing tracks
Note
You can not erase tracks that have been checked
out from your computer. You can not erase a
group or an entire disc if it contains a checked-
out track. In this case, check in the track or
tracks to OpenMG Jukebox.
To erase a track
Note that once a recording has
been erased, you cannot retrieve it.
Make sure of the track you are
erasing.
1 While playing the track you want to
erase, press MENU (EDIT for 2
seconds or more).
2 Press . or > (flip the lever
towards > or .) repeatedly
until EDIT flashes in the display,
and then press ENTER (ENTER)
again.
:Name flashes in the display,
and the recorder plays the selected
track repeatedly.
3 Press . or > (flip the lever
towards > or .) repeatedly
until :Erase flashes in the
display, and then press ENTER
(ENTER).
Erase OK? and PushENTER
appear alternately in the display.
4 Press ENTER (ENTER) again.
The track is erased and the next track
starts to play. All the tracks after the
one erased are automatically
renumbered.
To erase a part of a track
Add track marks at the beginning and the
end of the part you want to erase, then
erase the part (page 53).
To cancel erasing
Press CANCEL (T MARK) in step 3.
To erase the whole disc
You can quickly erase all the tracks and
data of the MD at the same time.
Note that once a recording has
been erased, you cannot retrieve it.
Be sure to check the contents of
the disc before you erase it.
This function can be operated on the
recorder only.
1 Play the disc you want to erase to
check the contents.
2 Press x to stop.
>/.
CANCEL
MENU
ENTER/./>
ENTER
EDIT
T MARK
continued