Filter
Top Products
48-GB
Labeling recordings
1 Insert a disc and do the following
operations:
To label a track
Start playing or recording a track you
want to label, and label the track
while playing or recording
operations.
To label a group
Turn group mode on (page 30) and
start playing or recording the track
within the group you want to label,
and label the group while playing or
recording operations.
To label a disc
If a disc is already recorded, follow
the procedures from step 2 while the
recorder is stopped. If a disc is new,
start recording and label a disc while
recording.
If you label a disc with group settings,
turn group mode on (page 30).
2 Press MENU (EDIT for 2 seconds or
more).
3 Press . or > (flip the lever
towards > or .) repeatedly
until “EDIT” flashes in the display,
and then press ENTER (ENTER).
4 Press . or > (flip the lever
towards > or .) repeatedly
until the following item appears in the
display, and then press ENTER
(ENTER).
When labeling a track
“ :Name”
When labeling a group
“ :Name”
When labeling a disc
“ :Name”
The cursor flashes and the track,
group, or disc is ready to be labeled.
5 Press . or > (flip the lever
towards > or .) repeatedly to
select a letter and press ENTER
(ENTER).
The selected letter stops flashing and
the cursor moves to the next input
position.
The buttons used for character input
and their functions are listed below:
6 Repeat step 5 and enter all characters
of the label name.
7 Press ENTER (ENTER) for 2
seconds or more
.
The track or disc is labeled.
To cancel labeling
Press CANCEL (T MARK) in step 6.
Functions Operations
To select a
character
Press . or >
(> or .).
To enter a letter Press ENTER
(ENTER).
To enter a name Press ENTER
(ENTER) for 2
second or more.
To insert a
blank space to
type in a new
letter
Press VOL +
(EDIT) and END
SEARCH at the
same time.
To delete a
letter and move
back all
following
letters to the left
Press VOL –
(DELETE) and
END SEARCH at
the same time.
To cancel
labeling
Press CANCEL
(T MARK).