Filter
Top Products
4
MZ-E10
SECTION 2
GENERAL
This section is extracted from
instruction manual.
The Player
1 2
7
8
9
E
C
D
6
1 i (Headphones/earphones) jack
2 GROUP button
3 “3-color info-LED”
4 HOLD (Locking the control) switch
5 5-way control key ( .•
> N
*
• x•VOL +, –)
6 OPEN switch
7 BUILT-IN BATTERY switch (at the
bottom)
8 Terminals for charging stand (at the
bottom)
9 Hand strap hole
Use the hole to attach your strap
*
N
has a tactile dot.
The display window of the remote
control
12 3456
7 9
1 Disc indication
2 Track number display
3 Character information display
4 Group play indication
5 Play mode indication
6 Virtual Surround/6-band equalizer
indications
7 Battery level indication
8 Bookmark indication
9 Alarm indication
The battery charging stand
1
2
1 DC IN (6V jack) (at the bottom)
2 Terminals for charging
The headphones/earphones with a
remote control
8
9
qa
qs
7
q;
A
B
C
D
5
F
1 Headphones/earphones
2 Stereo mini plug
3 Control VOL +, –
Turn to adjust the volume .
4 x (stop) button
5 Jog lever (.•
u
/ENT•
>
)
6 (Group) +, – button
7 Clip
8 HOLD switch
9 Display window
q; DISPLAY button
qa P MODE / (play mode/repeat) button
qs SOUND button
8
To
Pause
Cue to the current track
or the previous track
Cue to the next track
Go backwards or
forward while playing
Searching for a specific
position while viewing
a elapsed time
(Time search)
Searching for a specific
track while viewing
track numbers or
track names
(Index search)
Cue to the beginning of
every 10th track
(only during playback of
the disc with no group
settings
1)
)
Remove the MD
1)
For more details, see “Using the group function.”
2)
Once you open the lid, the point to start play will change to the beginning of the first track (except
when the disc information has been stored in the personal disc memory).
About the “3-color info-LED”
The LED indicates the current operating mode, charging status, and battery condition. For
details about the charging status, see “Getting started.” For details about the battery condition,
see “When to recharge the built-in battery” on the back page.
LED color
Red
Green
Orange
Do this (Beeps in the headphones/earphones)
Press the jog lever (u) on the remote control (continuous short
beeps).
Press the jog lever (u) again to resume play.
Slide the jog lever towards . on the remote control
(three short beeps). (Press towards . on the player. )
Slide the jog lever towards > on the remote control (two short
beeps). (Press towards
>
on the player.)
Slide and hold the jog lever towards . or > on the remote
control. (Press and hold towards . or > on the player.)
While the player is paused, slide and hold the jog lever towards
. or > on the remote control.
While the player is stopped, slide and hold the jog lever towards
. or > on the remote control.
Press + or – button.
Press x, and then slide OPEN
2)
.
Playing an MD
Insert an MD.
1
2
3
Play an MD.
x> N.
VOL +
VOL –
x
VOL+
VOL–
1 Press the jog lever ( u) on the remote control. (Press towards > N on
the player.)
A short beep sounds in the headphones/earphones. The LED lights up.
2 Turn the control towards VOL + or – on the remote control to adjust the
volume. (Press towards VOL + or – on the player. )
The volume indicator appears in the display, allowing you to check the
volume level.
To stop play, press
x.
A long beep sounds in the headphones/earphones.
Playback starts from the point you last stopped playing. To start playback from the
beginning of the disc, press and hold the jog lever (u) for 2 seconds or more on the
remote control (Press and hold towards > N for 2 seconds or more on the player).
1
2
Insert an MD with the label side facing up, pushing the
MD to the direction of the arrow in the illustration.
1 Slide OPEN to open the lid. 2 Insert an MD. 3 Close the lid.
“3-color info-LED”
Jog lever (.•u/ENT•>)
5-way control key
Bottom side of
the player
Operating status
Playing a disc with no group settings
Playing a disc with group settings
Cueing to the another group (Group Skip)