Filter
Top Products
4
MZ-E300
SECTION 3
DISASSEMBLY
Note : Follow the disassembly procedure in the numerical order given.
3-1. “LID ASSY, UPPER”, HOLDER ASSY
3-2. MECHANISM DECK
• The equipment can be removed using the following procedure.
1
Screws (1.4),MI
Case ASSY
3
Lid ASSY , Upper
5
Holder ASSY
Holder ASSY
Reinforcement
Spring (POP/L)
4
Move it away
from projection
4
Move it away
from projection
2
Move it away
from projection
7 Screws, tapping (1.7)
Case ASSY
Mechanism deck
Reinforcement
3 Claw
2
4
8
1 Screw (MD), step
5 Motor flexible board
6 OP flexible board
Optical pick-up ASSY
Set
“Lid ASSY, Upper”,
Holder ASSY
Mechanism deck
Main board
Note : Holder ASSY installation
1. Attach the holes on Holder ASSY to the projections on right and left sides.
2. Attach Spring (POP/L) as shown in the figure.