Filter
Top Products
Chapter 5: Editing Recorded MDs
GB
19
A
B
C
12
3
1234
A#1
A#1
A(#1+#3)
#3 B C
B
C
1
2
34
1
2
3
#2 #3
B
C
5
1 Press MD.
The unit enters MD play mode.
2 Press EDIT/NO repeatedly until “All
Erase?” appears in the display in stop
mode.
3 Press ENTER/YES.
“All Erase??” appears in the display.
4 Press ENTER/YES again.
When all recorded tracks, the disc name,
and titles on the MD have been erased,
“Complete” appears for a few seconds.
To stop before all tracks, the disc
name, and titles have been erased
Press .
Erasing part of a track
By using the divide, erase, and combine
functions, you can erase specific portions of
a track.
Moving Recorded
Tracks
(move function)
You can change the position of any track.
After you move a track, the tracks between
the new and old track positions are
automatically renumbered.
Track C moves to track position 2.
1 Press MD.
The unit enters MD play mode.
2 Turn the JOG dial until the track
number you want to move appears in
the display.
For example, if you want to move 7th
track to 1st, turn the JOG dial until 7th
track appears in the display.
3 Press EDIT/NO repeatedly until
“Move ?” appears in the display.
4 Press ENTER/YES.
5 Turn the JOG dial until the new track
number appears.
6 Press ENTER/YES.
After you have moved the track,
“Complete” appears for a few seconds.
To stop before the track has been
moved
Press .
VOLUME
MD
1
6
11
2
7
3
8
4
9
5
10
TRACK
Track
number you
want to move
Music calendar
VOLUME
MD
1
6
11
2
7
3
8
4
9
5
10
TOC
EDIT
New track number
Track number
you want to
move
Dividing Recorded
Tracks
(divide function)
In the following cases, you can divide a
track into two or more tracks and put new
track numbers for searching particular
points of the tracks.
•When you recorded from an analog
source and therefore the MD contains
only one track number
•When you want to put markings in a track
to find particular points
After you divide a track
The total number of tracks on the MD
increases by one and all tracks following
the divided track are renumbered.
1 While playing the MD, press fl at the
point where you want to create a new
track.
The deck pauses playing.
2 Press EDIT/NO repeatedly until
“Divide ?” appears in the display.
3 Press ENTER/YES.
“Rehearsal” alternates with “Position
ok?” in the display, and the starting
portion of the new track begins playing
repeatedly.
POWER m ON
31
2,54,6
„
POWER m ON
2,4
53,6
„
1
continue to next page m
Track
number
Dividing
Erasing
Combining
A is divided
into 3 parts.
#1 and #3 are
combined.
#2 is erased.
Part to be erased
Example: Erasing a part of track A
1
A
23 4
B
C
D
12 34
ACBD
Moving
Track
number
Example: Moving C to track position 2
12 3
AB C D
123 4
AB C D
Example: Dividing track 2 to create a new
track for C
Track
number
Dividing
Track 2 is divided, creating a separate
track for C, and all the following
tracks are renumbered.