Filter
Top Products
Chapter 5: Editing Recorded MDs
GB
18
Chapter 5:
Editing
Recorded MDs
Erasing Recordings
(erase function)
Moving Recorded Tracks
(move function)
Dividing Recorded Tracks
(divide function)
Combining Recorded Tracks
(combine function)
Labelling Recordings
(title function)
2 Turn the JOG dial to select the track
number you want to erase.
3 Press EDIT/NO repeatedly until “Erase
?” appears in the display.
4 Press ENTER/YES.
“Erase ??” appears in the display.
5 Press ENTER/YES again.
“Complete” appears in the display for a
few seconds and the track selected in
step 2 is erased.
6 Repeat steps 2 to 5 to erase more tracks.
To stop before the track has been
erased
Press .
If “Erase!! ?” appears in the display
The track was recorded or edited on
another MD deck and is record-protected.
If you still want to erase the track, press
ENTER/YES while this indication is
displayed.
Erasing all tracks
You can easily create a blank MD. You can
erase all recorded tracks, titles and names at
the same time.
Note that once erased, MD data cannot be
recovered.
VOLUME
MD
1
6
11
2
7
3
8
4
9
5
10
TRACK
TOC
EDIT
VOLUME
MD
1
6
11
2
7
3
8
4
9
5
10
TRACK
TOC
EDIT
Music calendar
Track
number you
want to erase
VOLUME
MD
1
6
11
2
7
3
8
4
9
5
10
TRACK
POWER m ON
31
24,5
„
POWER m ON
21
3,4
„
Erasing Recordings
(erase function)
You can erase the recorded sound easily.
Since erasing updates the TOC, you do not
have to record over previous material. You
can choose from the following three erase
methods:
• Erasing a single track
• Erasing all tracks
• Erasing parts of a track
When erasing two or more tracks
When you erase a track, all tracks following
the erased one are renumbered. For
example, if you erase track 1, the original
track 2 will be renumbered as track 1.
To avoid confusion, you should erase
starting from high track numbers and
proceeding to low track numbers. This
prevents renumbering of tracks that have
not yet been erased.
Erasing a single track
You can erase a track simply by specifying
its track number. When you erase the
track, the total number of tracks on the MD
decreases by one and all tracks following
the erased one are renumbered.
1 Press MD.
The unit enters MD play mode.
AB C D
AC D
1
23
4
1
23
Erasing
Example: Erasing B
Track
number
B is erased.