Filter
Top Products
6
VOLTAGE SELECTOR
120V 220V
230 - 240V
4 For models with a voltage selector,
set VOLTAGE SELECTOR to the
local power line voltage.
5 Connect the power cord to a wall
outlet.
The demonstration appears in the
display. When you press ?/1, the system
turns on and the demonstration
automatically ends.
If the supplied adapter on the plug does
not fit your wall outlet, detach it from
the plug (only for models equipped with
an adapter).
Step 1: Hooking up the system
(continued)
6 Follow the instructions below to set
the color system according to your
TV. The factory setting is AUTO.
Make sure the power is off each
time before setting the color system.
After you set the color system, the
power turns on automatically and
the function is set to CD.
If your TV automatically changes the
color system according to the input
signal:
Press ?/1 while holding down X. The color
system is set to AUTO.
AUTO automatically changes the color
system of the video output according to the
color system of the current VIDEO CD.
If the color system of your TV is NTSC:
Press ?/1 while holding down >. The color
system is set to NTSC.
If the color system of your TV is PAL:
Press ?/1 while holding down .. The color
system is set to PAL.
Note
When you set color system to NTSC and play back a
VIDEO CD recorded in the PAL color system, the
picture image may be distorted depending on the
disc. Similarly, when you set color system to PAL
and play back a VIDEO CD recorded in the NTSC
color system, the picture image may be distorted
depending on the disc.
To connect optional components
See page 49.
To deactivate the demonstration
When you set the time (“Step 2: Setting the
time” on page 8), the demonstration is
deactivated.
To activate/deactivate the demonstration
again, press DISPLAY once while the system
is off.