Sony MHC-VX33 Stereo System User Manual


 
12
To
Stop play
Pause
Select a track or
scene*
2
Find a point in a
track or scene
(Lock Search
function)
Select a VIDEO
CD in stop mode
Play only the
VIDEO CD you
have selected
Play all VIDEO
CDs
Remove the
VIDEO CD
Exchange other
VIDEO CDs
while playing
Adjust the
volume
*
1
There may be some disturbance in the video
image.
*
2
Only when the PBC function is set to off or when
playing VIDEO CDs without PBC functions (Ver
1.1).
*
3
Only for VIDEO CDs with PBC functions (Ver 2.0)
while the PBC function is set to on.
*
4
SHUFFLE means to playback in random order
(see page 34). This function cannot be used during
menu playback of a VIDEO CD with PBC
functions (Ver 2.0).
Tips
•You can switch from another source to the VIDEO
CD player and start playing a VIDEO CD just by
pressing one of the DISC 1~3 buttons (Automatic
Source Selection).
•If there is no VIDEO CD in the player, “CD NO
DISC” appears in the display.
•When a disc tray holding a VIDEO CD is selected
(or the VIDEO CD in the disc tray is playing) the
disc pointer indicator lights. When a disc tray
holding a VIDEO CD is not selected, the disc
presence indicator lights, but the disc pointer
indicator does not light. When all disc trays are
empty, both the disc presence indicator and disc
pointer indicator light.
Note
When a tray has not been read by the unit, the disc
presence indicator may light even though there is no
disc on the tray.
Playing a VIDEO CD (continued)
Do this
Press x.
Press X*
1
. Press again to
resume playback.
Press
>
to go forward or
.
to go back. When you play
VIDEO CDs with PBC functions
(Ver 2.0), see page 23.
There are two types of
searching:
1 Turn the shuttle until it
clicks during playback and
hold. According to the length
of turning the shuttle, speed
changes as follows (press and
hold down m/M on the
remote):
1 (slow) t 2 (normal) t
3 (high)
Release the shuttle at the
desired speed and the search
goes on at the speed.
Press hH to stop searching
and start playback at the
desired point.
2 Turn the shuttle until it
clicks during playback. Each
time it is turned, speed
changes as follows (press
m/M on the remote):
1 (slow) t 2 (normal) t
3 (high) t 1 (slow) …
Press hH to stop searching
and start playback at the
desired point.
Press a DISC 1~3 button or
DISC SKIP EX-CHANGE (or
D. SKIP on the remote).
Press PLAY MODE repeatedly
until “CONTINUE 1 DISC”,
“PBC 1 DISC”*
3
or “SHUFFLE
1 DISC”*
4
appears.
Press PLAY MODE repeatedly
until “CONTINUE ALL
DISCS”, “PBC ALL DISCS”*
3
or “SHUFFLE ALL DISCS”*
4
appears.
Press Z OPEN/CLOSE.
Press DISC SKIP
EX-CHANGE.
Turn VOLUME (or press
VOL +/– on the remote).