Filter
Top Products
49
Connecting audio
components
Select one of the following connections,
depending on the component to be connected
and method of connecting. Refer to the
instructions of each component.
Connecting an MD deck
for digital recording
You can record from CD into the MD deck
digitally by connecting an optional optical
cable.
To the digital input jack of the MD deck
Optional components
To check the setting
Press CLOCK/TIMER SELECT and press
. or > repeatedly to select “REC”, then
press ENTER.
To change the setting, start over from step 1.
To cancel the timer operation
Press CLOCK/TIMER SELECT and press
. or > repeatedly to select “TIMER
OFF”, then press ENTER.
Notes
•If the power is on at the preset time, the recording
will not be made.
•You cannot set the timer if the starting time and
stopping time are the same.
•When you use the Sleep Timer, Timer-recording
will not turn on the system until the Sleep Timer
turns it off.
•You cannot activate Timer-recording and Daily
Timer at the same time.
continued