Filter
Top Products
14
To Do this
Stop playback Press x.
Pause Press X. Press again to resume
playback.
Select a track During play or pause, press
> (to go forward) or .
(to go back).
Find a point in Turn the shuttle clockwise
a track (Lock (to go forward) or
Search function) counterclockwise (to go
back) until it clicks
(or press M or m on the
remote) and then press hH
when you find the desired
point .
Select a CD Press a DISC 1~3 button or
in stop mode DISC SKIP EX-CHANGE (or
D. SKIP on the remote).
Play only the Press PLAY MODE
CD you have repeatedly until “CONTINUE
selected 1 DISC” or “SHUFFLE 1
DISC” appears.
Play all CDs Press PLAY MODE repeatedly
until “CONTINUE ALL
DISCS” or “SHUFFLE ALL
DISCS” appears.
Remove the CD Press Z OPEN/CLOSE.
Exchange other Press DISC SKIP
CDs while EX-CHANGE.
playing
Adjust the Turn VOLUME (or press
volume VOL +/– on the remote).
Tips
•You can switch from another source to the CD
player and start playing a CD just by pressing one
of the DISC 1~3 buttons (Automatic Source
Selection).
•If there is no CD in the player, “CD NO DISC”
appears in the display.
•When a disc tray holding a CD is selected (or the
CD in the disc tray is playing) the disc pointer
indicator lights. When a disc tray holding a CD is
not selected, the disc presence indicator lights, but
the disc pointer indicator does not light. When all
disc trays are empty, both the disc presence
indicator and disc pointer indicator light.
Note
When a tray has not been read by the unit, the disc
presence indicator may light even though there is no
disc on the tray.
Playing a CD (continued)