Filter
Top Products
37
Looping part of a CD
— Loop
With the loop function, you can repeat part of
a CD during playback. This lets you create
original recordings.
Flashing part of a CD
— Flash
With the flash function, you can “flash” the
CD sound during playback. This lets you
create original recordings.
DJ Effects
, Press and hold LOOP during
playback at the point you want to
start the Loop function, and release
to resume normal play.
To adjust the loop length
Press MULTI MENU v/V while holding
LOOP on the remote to select different LOOP
lengths (LOOP 1~20).
, Press and hold FLASH during
playback at the point you want to
start the Flash function, and release
to resume normal play.
To adjust the flash length
Press MULTI MENU v/V while holding
FLASH to select different flash lengths
(FLASH 1~20).
To use LOOP and FLASH together
Press and hold both LOOP and FLASH at the
same time.
Notes
• The loop and flash length cannot be adjusted
during this operation. Adjust the loop and flash
lengths independently beforehand if necessary.
• To record the loop or flash effect, use the tape
deck on this unit.
NXx
xMm>.
nN
O
v
V
bB
X
LOOP
MULTI MENU v/V
NXx
xMm>.
nN
O
v
V
bB
X
FLASH
MULTI MENU v/V