Filter
Top Products
36
9 Repeat steps 5 and 6 for tracks from
the same disc or steps 4 to 6 for
tracks from another disc to program
the remaining tracks to be recorded
on side B.
10 Press CD SYNC HI-DUB.
Deck B stands by for recording and the
CD player stands by for playback. REC
PAUSE/START button blinks.
11 Press DIRECTION repeatedly to
select g to record on one side.
Select j (or RELAY) to record on
both sides.
12 Press REC PAUSE/START.
Recording starts.
To stop recording
Press x.
To check the order
Press CHECK on the remote repeatedly. After
the last track, “CHECK END” appears.
To cancel Program Edit
Press PLAY MODE repeatedly until “PGM”
or “SHUFFLE” disappears from the display.
Tip
When you want to reduce the hiss noise in low-level
high-frequency signals, press DOLBY NR so that
“DOLBY NR” appears after pressing CD SYNC HI
DUB (MHC-VX99 only).
Selecting tape length
automatically
—Tape Select Edit
You can check the most suitable tape length
for recording a CD. Do the following steps
before recording.
1 Place a CD.
2 Press CD.
3 Press EDIT once, so that “EDIT”
flashes.
The required tape length for the
currently selected CD appears, followed
by the total playing time for side A and
side B respectively.
Note
You cannot use Tape Select Edit for discs containing
over 20 tracks.
Recording a CD by specifying track
order (continued)