Filter
Top Products
Basic Operations
13
To Do this
Stop play Press x.
Pause Press X.
Press again to resume play.
Select a track During play or pause, press
> (to go forward) or .
(to go back).
Find a point in Turn SHUTTLE clockwise (to
a track go forward) or
counterclockwise (to go back)
until it clicks and hold. Release
it when you reach the desired
point (or press and hold down
M or m on the remote).
Then press nN.
Select a CD Press a DISC 1~3 button or
in stop mode DISC SKIP EX-CHANGE (or
D. SKIP on the remote).
Play only the Press PLAY MODE
CD you have repeatedly until “CONTINUE
selected 1 DISC” or “SHUFFLE 1
DISC” appears.
Play all CDs Press PLAY MODE repeatedly
until “CONTINUE ALL
DISCS” or “SHUFFLE ALL
DISCS” appears.
Remove the CD Press Z OPEN/CLOSE.
Exchange other
Press DISC SKIP EX-CHANGE.
CDs while
playing
Adjust the Turn VOLUME (or press
volume VOL +/– on the remote).
Tips
• You can switch from another source to the CD
player and start playing a CD just by pressing the
DISC 1~3 buttons (Automatic Source Selection).
• If there is no CD in the player, “CD NO DISC”
appears in the display.
• When a disc tray holding a CD is selected (or the
CD in the disc tray is playing) the disc pointer
indicator lights. When a disc tray holding a CD is
not selected, the disc presence indicator lights, but
the disc pointer indicator does not light. When all
disc trays are empty, both the disc presence
indicator and disc pointer indicator light.
Note
When a tray has not been detected by the unit, the
disc pointer indicator may light even though there is
no disc on the tray.
Recording a CD/VIDEO
CD
— CD Synchro Recording
The CD SYNC HI-DUB button lets you record
from a CD to a tape easily. You can use TYPE
I (normal) tape.
1 Press Z and insert a recordable tape
into deck B.
2 Press CD.
With the side
you want to
record facing
forward
?/1
(Power)
14
35
DISC SKIP
EX-CHANGE
6
x
DOLBY NR
2
continued