61
MHC-S90D 4-235-983-13(2) GB
Additional Information
Speakers
Sound comes from only one channel or
unbalanced left and right volume.
• Check the speaker connection and speaker
placement.
• The source being played back is monaural.
• Adjust the balance parameters (pages 23, 51).
The sound comes from the center speaker only.
• Depending on the disc, the sound may come
from the center speaker only.
There is no sound from the center speaker.
• Set the center speaker level to the appropriate
level.
• Make sure the center speaker selection parameter
in the “SP. SET UP” menu is set to “YES”.
• Select a sound field containing the word
“CINEMA” or “VIRTUAL”.
There is no sound from the rear speakers.
• Set the rear speakers level to the appropriate
level.
• Make sure the rear speakers selection parameter
in the “SP. SET UP” menu is set to “YES”.
• Select a sound field containing the word
“CINEMA” or “VIRTUAL”.
• The software being played back has limited
sound effects. Check the volume with the test
tone.
No sound or only a very low-level sound is heard
from the rear speakers.
• Make sure the sound field function is on (page
48).
Sound lacks bass.
• Check that the speaker’s + and – terminals are
connected correctly.
DVD/VIDEO CD/CD Player
The disc tray does not close.
• The disc is not placed properly.
The disc does not play.
• The disc is not lying flat in the disc tray.
• The disc is dirty (see page 58).
• The disc is inserted label side down.
• Moisture condensation has built up.
• The system cannot play CD-ROMs, etc. (page 6).
• The region code on the DVD does not match the
system.
The disc does not start playback from the
beginning.
• Program Play, Shuffle Play, or Repeat Play has
been selected (pages 25, 28, 30). Press CLEAR
to cancel these functions before playing a disc.
• Resume Play has been selected. When the
playback is stopped, press x (DVD/VIDEO CD/
CD), then start DVD playback (page 30).
• The title, DVD or PBC menu automatically
appears on the screen.
Playback starts automatically.
• The DVD features an auto playback function.
Playback stops automatically.
• Some discs may contain an auto pause signal.
While playing such a disc, the playback stops at
the auto pause signal.
You cannot perform some functions such as
Stop, Search, Slow-motion Play, Repeat Play,
Shuffle Play, or Program Play.
• Depending on the disc, you may not be able to
do some of the operations above. Refer to the
operating instructions supplied with the disc.
continued