Filter
Top Products
22
MHC-S90D 4-235-983-13(2) GB
Notes
• When you select an item, the sound cuts off for a
moment.
• Depending on the settings of other speakers, the
subwoofer may output excessive sound.
Specifying the rear speaker position
and height
If you select anything other than “NONE” in
“REAR”, specify the position and height of the
rear speakers.
Rear speaker position
• SIDE: Select this if the location of your rear
speakers corresponds to section A.
• MIDDLE: Select this if the location of your
rear speakers corresponds to section B.
• BEHIND: Select this if the location of your rear
speakers corresponds to section C.
Rear speaker height
• LOW: Select this if the location of your rear
speakers corresponds to section A.
• HIGH: Select this if the location of your rear
speakers corresponds to section B.
Speaker settings
— SPEAKER SETUP
Set up your speaker system for playback of
5.1CH DVDs.
To return to the default setting
Select the item, then press CLEAR.
x SIZE
When you do not connect center, rear speakers
or sub woofer, or move the rear speakers, set
the parameters for CENTER, REAR and
SUBWOOFER. Since the front speaker setting
is fixed, you cannot change them.
FRONT
• YES
CENTER
• YES: Normally select this.
• NONE: Select this when a center speaker is not
used.
REAR
• BEHIND (LOW), BEHIND (HIGH), MIDDLE
(LOW), MIDDLE (HIGH), SIDE (LOW),
SIDE (HIGH): Specify the position and height
to implement the Digital Cinema Surround
modes in the “Virtual Multi Dimension” sound
field (page 49) properly.
• NONE: Select this when rear speakers are not
used.
SUBWOOFER
• YES: Select this when a subwoofer is used.
• NONE: Select this when a subwoofer is not
used.
Select “SPEAKER SETUP” in the Setup Display.
SPEAKER SETUP
DISTANCE:
SIZE:
BALANCE:
LEVEL:
OFF
TEST TONE:
FRONT:
CENTER:
YES
BEHIND(LOW)
YES
YES
REAR:
SUBWOOFER:
60°
90°
20°
A
B
30°
B
C C
A
60
30
A
B
A
B