Filter
Top Products
MHC-S90D 4-235-983-13(2) GB
34
Changing the sound
If a DVD is recorded with multilingual tracks,
you can select the language you want while
playing the DVD. If the DVD is recorded in
multiple audio formats (PCM, Dolby Digital,
MPEG audio, or DTS), you can select the audio
format you want while playing the DVD.
With stereo CDs or VIDEO CDs, you can
select the sound from the right or left channel
and listen to the sound of the selected channel
through both the right and left speakers. (In this
case, the sound loses its stereo effect.) For
example, when playing a disc containing a song
with the vocals on the right channel and the
instruments on the left channel, you can select
the left channel and hear only the instruments
from both speakers.
1 Press DVD DISPLAY during playback.
The Control Menu appears.
2 Press O or o repeatedly to select
“AUDIO”, then press ENTER.
3 Press O or o repeatedly to select the
audio signal you want.
x When playing a DVD
Depending on the DVD, the choice of the
language varies. When 4 digits are
displayed, they represent the language code
(see the language code list on page 69).
When the same language is displayed two
or more, the DVD is recorded in multiple
audio formats.
x When playing a VIDEO CD or CD
• STEREO: The standard stereo sound.
• 1/L: The sound of the left channel
(monaural).
• 2/R: The sound of the right channel
(monaural).
4 Press ENTER.
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the
Control Menu is turned off.
Tip
You can select “AUDIO” directly by pressing
AUDIO on the remote. Each time you press the
button, the item changes.
Notes
• For discs not in multiple audio format, you cannot
change the sound.
• During DVD playback, the sound may change
automatically.
• If you press DVD DISPLAY while adjusting
parameters using buttons on the unit, the display of
the front panel turns off.
Displaying the audio
information of the disc
(DVD only)
When you select “AUDIO”, the channels being
played are displayed on the screen.
For example, in Dolby Digital format, multiple
signals ranging from monaural to 5.1 channel
signals can be recorded on a DVD. Depending
on the DVD, the number of the recorded
channels may differ.
* “PCM”, “MPEG”, “DTS”, or “DOLBY DIGITAL”
is displayed.
For “DOLBY DIGITAL”, the channels in the
playing track are displayed numerically as follows:
For Dolby Digital 5.1 ch:
Current audio format*
Current playing program format**
Rear component 2
Front component 2 +
Center component 1
LFE (Low Frequency
Effect) component 1
Sound adjustment
DVD
1: ENGLISH
1 8
(
3 4
)
1 2
(
2 7
)
T
1 : 3 2 : 5 5
LRC
DOLBY DIGITAL 3/2.1
PROGRAM FORMAT
LFE
LS RS
DOLBY DIGITAL
3 / 2 . 1