Sony MHC-GNZ55D Stereo System User Manual


 
Getting Started
19
GB
Notes
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
You cannot set the clock in Power Saving Mode
(page 76).
Before using the system, you can make the
minimum basic adjustments (LANGUAGE
SETUP, SCREEN SETUP, SPEAKER
SETUP*) in QUICK SETUP. After performing
QUICK SETUP, the system is ready for
playback. To perform further speakers settings,
see “Setting the speakers” on page 53.
* Except for MHC-GNZ77D/MHC-GNZ55D.
Note
When there is a disc in the unit or the disc tray is
opened, the guide message does not appear on the
TV screen. To perform QUICK SETUP, press Z
OPEN/CLOSE on the unit to remove the disc and press
again to close the disc tray.
1 Turn on your TV and select the video
input.
2 Press ?/1 to turn on the system.
Note
Make sure that the headphone or microphone is
not connected. Otherwise, you cannot perform
SPEAKER SETUP.
3 Press FUNCTION +/– repeatedly to
select “DVD” (or press DVD on the
unit).
The guide message appears at the bottom of
the TV screen.
4 Press ENTER.
The “LANGUAGE SETUP” display
appears on the TV screen.
5 Press V or v repeatedly to select a
language, then press ENTER.
Tips
The selected language is for “OSD”, “MENU”
and “SUBTITLE ”.
The selectable language is different depending
on the area.
The setting is selected and the “SCREEN
SETUP” display appears on the TV screen.
6 Press V