Filter
Top Products
22
2 Use the digipad to adjust the
parameters.
The parameter is adjusted according to the
curve your finger slides on the digipad.
Adjustable parameters are described below.
After the curve your finger slides is displayed
for a while, then the curve automatically
adjusted by the unit is displayed. For DSP
EDIT, the adjustable parameters vary
depending on the preset effect.
3 Press ENTER.
To cancel
Press EFFECT (or EFFECT ON/OFF on the
remote) to select “EFFECT OFF”. The
adjustment for the selected parameter is
canceled.
Adjustable parameters
Menu Right/Left Up/Down
(X) (Y)
DSP EDIT (See the chart below)
EQ EDIT Frequency Level
Adjustable DSP parameters
Sound effect Right/Left Up/Down
options (X) (Y)
LIVE HOUSE Time Wall type
HALL Time Wall type
S.ENHANCE Time Level
RADIO SOUND Time Level
C.STUDIO A Level —
C.STUDIO B Level —
C.STUDIO C Level —
NORMAL SURR
——
ARCADE Time Level
RACING Shape —
ADVENTURE Frequency Level
BATTLE Time Wall type
PAN Position Position
FLANGER Frequency Level
KEY CONTROL Key Time
EXCITER Frequency Level
COMPRESSOR Time Level
REVERB Time Wall type
EARLY RFLC. Shape —
Wall type: This parameter lets you control the level of
the high frequencies to alter the sonic character of
your listening environment by simulating a softer or
harder wall.
The adjustable DSP parameters are shown by
the indicator on the upper left corner in the
display. You can adjust in the direction the
cursor lights. Slide your finger on the digipad
to adjust the parameters.
Tips
• You can use the cursor buttons (v/V/b/B) on the
remote instead of the digipad. You can press
2 buttons simultaneously to move obliquely.
Example: Press v and B simultaneously to move
upper right direction.
• You can store the adjusted effect in a personal file
(see “Creating a personal audio effect file”).
Creating a personal
audio effect file
— Personal file
You can store the adjusted audio effects in the
system’s memory. You can create up to
5 audio effect files.
1 Obtain the sound effect you want to
store to P FILE.
2 Press and hold P FILE.
The personal file number appears in the
display.
3 Touch the digipad to select the file
number where you want to store the
effect.
4 Press ENTER.
To call up a personal file
Press P FILE repeatedly to select the file.
Note
When using personal files, the adjustable DSP EDIT
parameters depend on the original preset effect.
Up/Down
(Y)
Right/Left
(X)
Adjusting the sound effects
(continued)