Filter
Top Products
13
CD
5 Press ENTER.
The track(s) is (are) programmed. The
program step number appears, followed by
the total playing time.
6 To program additional tracks, repeat
steps 3 to 5.
Skip step 3 to select tracks from the same
disc.
7 Press nN.
To
Cancel Program Play
Clear a track from
the end
Add a track to the
program when
playback is stopped
Tips
• The program you made remains in the system’s
memory even after it has been played back. Press
nN to play the same program again.
• If “--.--” appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20.
– the total playing time has exceeded 100 minutes.
21
MUSIC
GAME
MOVIE
AB
TOOL
3
PROGRAM
Track
number
Disc tray
number
Total playing time
(including selected
track)
To
Play
repeatedly
(Repeat Play)
* You cannot use this function during ALL DISCS
SHUFFLE.
Tips
• You can use the digipad for CD operations.
• Pressing CD while the power is off automatically
turns the power on.
Programming the CD
tracks
–– Program Play
You can make a program of up to 25 tracks
from all the CDs in the order you want them to
be played.
1 Press CD.
2 Press PLAY MODE repeatedly until
“PROGRAM” appears in the display.
3 Press DISC 1–3 to select a CD.
To program all the tracks on a CD at once,
proceed to step 5 while “AL” appears in the
display.
4 Press . or > repeatedly until the
track you want appears in the display.
Do this
Press REPEAT during playback
until “REPEAT” or “REPEAT
1” appears.
REPEAT*: For all the tracks on
the CD up to 5 times.
REPEAT 1: For a single track
only.
To cancel Repeat Play, press
REPEAT until “REPEAT” and
“REPEAT 1” disappears.
Press
PLAY MODE repeatedly until
“1 DISC” or “ALL DISCS”
appears in the display.
CLEAR on the remote when
playback is stopped.
1 Press DISC 1–3 to select a
CD.
2 Press . or >
repeatedly to select the
track.
3 Press ENTER.