Filter
Top Products
8
Caution alarm
If you turn the ignition key switch to the OFF
position without removing the front panel, the
caution alarm will beep for a few seconds.
TIR indicator
If you pull out the ignition key while the TIR
function is on, the TIR indicator flashes a few
times.
TIR indicator
For more information on the TIR function,
refer to “Recording the traffic announcements”
(page 20).
Preparing the rotary
commander
When you mount the rotary commander,
attach the labels as shown in the illustration
below.
Setting the clock
The clock uses a 24-hour digital indication.
Example: To set the clock to 10:08
1 Press (SHIFT), then press (3) (SET UP).
1 Press (5) (t).
The hour digit flashes.
2 Set the hour.
3 Press (5) (t).
The minute digits flash.
4 Set the minute.
to go forward
to go backward
to go forward
to go backward