Filter
Top Products
25
Voice Memo
Voice Memo is a function that allows you to
record a voiced memorandum, such as the
name of a song heard on a radio programme or
an idea which comes to mind. You can record
up to six voice memos with this function. Note
that each voice memo must be within 15
seconds.
You can record or play back the voice memo
when listening to any source or during the
clock display.
Use the rotary commander to control this
function.
Note
While the unit is receiving, recording, or playing
back the traffic announcements, the voice memo
function does not work.
Recording a voice memo
1 Press (REC) on the rotary commander
and voice your memorandum toward the
supplied microphone.
2 The recording is completed by pressing
(REC) again or leaving the unit
untouched for 15 seconds.
Notes
• The voice memos are recorded as “MEMO 1”,
“MEMO 2”, etc.,…in the order they are recorded.
• When a beep sounds and “MEMO FULL”
appears, it means there is no room for additional
voice memos. In such a case, erase the older
recorded voice memos before recording new
ones.
MEMO 1
MEMO 2
MEMO 3MEMO 4
MEMO 6
MEMO 5
Playing back the voice
memo
1 Press (PLAY) on the rotary commander.
The playback starts from MEMO 1.
2 Select the desired voice memo using the
SEEK/AMS control.
3 Adjust the volume on the main unit or
by using the rotary commander.
The unit automatically returns to the
previous source after playing back all of the
voice memos.
To interrupt the playback of a voice
memo
Press (PLAY) on the rotary commander.
Playback stops and the unit automatically
returns to the previous source.