Filter
Top Products
12
Creating a programme
— MD Programme Memory
You can play the tracks in any order you want
by making your own programmes. You can
select up to 24 tracks for a programme. You
can store the programmes in memory.
1 During MD playback, press (SHIFT), then
press (4) (PLAY MODE) for two seconds.
2 Push the SEEK/AMS control up or down
to select the track you want.
3 Press (6) (ENTER) momentarily.
x
4 To continue entering tracks, repeat steps
2 and 3.
5 When you finish selecting tracks, press
(4) (PLAY MODE) for two seconds.
6 Press (SHIFT).
Notes
•“*Wait*” appears in the display while the unit is
reading the data.
•“*Mem Full*” appears in the display when you
try to enter more than 24 tracks into a
programme.
Playing the stored programme
1 Press (SHIFT).
2 Press (4) (PLAY MODE) repeatedly until
“PGM” appears.
3 Press (5) (t) repeatedly until “PGM on”
appears.
Programme Play starts.
4 Press (SHIFT).
To return to the normal playback mode, select
“PGM off” in step 3 above.
Notes
• “No data” appears in the display if no track is
stored in the programme.
• ”Not ready” appears in the display if a disc that
has no programmed tracks is inserted.