Filter
Top Products
32
US
a)
For details, refer to the page in the parentheses.
b)
“CONTROL FOR HDMI” scroll across the display, then “CONTROL” appears.
c)
The initial setting for the model of MX area code is “CTRL ON”.
d)
This parameter is only available when the result of the Auto Calibration is saved.
e)
When the Auto Calibration result is saved, you can adjust the setting in 0.01 meter increment.
f)
This parameter is only available when SAT input is selected.
Menu
[Display]
Parameters
[Display]
Settings Initial setting
Level settings
[LEVEL]
(page 35)
Test tone
a)
[T. TONE]
T. TONE N, T. TONE Y T. TONE N
Front left speaker level
a)
[FL LVL]
FL –6 dB to FL +6 dB
(0.5 dB step)
FL 0.0 dB
Center speaker level
[CNT LVL]
CNT –6 dB to CNT +6 dB
(0.5 dB step)
CNT 0.0 dB
Front right speaker level
[FR LVL]
FR –6 dB to FR +6 dB
(0.5 dB step)
FR 0.0 dB
Surround right speaker level
[SR LVL]
SR –6 dB to SR +6 dB
(0.5 dB step)
SR 0.0 dB
Surround left speaker level
[SL LVL]
SL –6 dB to SL +6 dB
(0.5 dB step)
SL 0.0 dB
Subwoofer level
[SW LVL]
SW –6 dB to SW +6 dB
(0.5 dB step)
SW 0.0 dB
Tone settings
[TONE]
(page 35)
Bass level
[BASS]
BASS –6 dB to BASS +6 dB
(0.5 dB step)
BASS 0.0 dB
Treble level
[TREBLE]
TRE –6 dB to TRE +6 dB
(0.5 dB step)
TRE 0.0 dB
Custom settings
[CUSTOM]
(page 36)
Digital broadcast language
selection
a)
[DUAL]
MAIN, SUB, MAIN/SUB MAIN
Synchronizes audio with
video output
a)
[A/V SYNC]
SYNC OFF, SYNC 1 to SYNC 20 SYNC OFF
Audio Dynamics range
compression
a)
[AUD. DRC]
DRC OFF, DRC STD, DRC MAX DRC OFF
Brightness of the display
a)
[DIMMER]
DIMMER Y, DIMMER N DIMMER N
Display
a)
[DISPLAY]
DSPL ON, DSPL OFF DSPL ON
Sleep timer
a)
[SLEEP]
SLP OFF, SLP 10M, SLP 20M….
SLP 90M
SLP OFF
Switching the audio input
mode
a)f)
[IN MODE]
AUTO, OPT AUTO