Filter
Top Products
28
US
2 Start the Bluetooth connection
from the Bluetooth device.
The (Bluetooth) indicator lights
in blue when the Bluetooth
connection is established.
3 Start playback on the Bluetooth
device.
For details on operation, see “To
control the Bluetooth device”
(page 30).
4 Adjust the volume.
Set the volume of the Bluetooth
device to a moderate level and touch
the VOL +/- touch keys on the
Sound Bar or press the VOL +/-
buttons on the remote control.
• You can adjust the volume of the system via
a Bluetooth device supporting AVRCP
(Audio Video Remote Control Profile)
VOLUME UP/DOWN. For details, refer to
the operating instructions supplied with the
device.
• The volume of the system may not be
controllable, depending on the device.
• If the source device has a bass boost function
or equalizer function, turn them off. If these
functions are on, sound may be distorted.
• In the following cases, you will have to make
the Bluetooth connection again.
– The power of the unit does not turn on.
– The power of the Bluetooth device does
not turn on, or the Bluetooth function is
off.
–The Bluetooth connection is not
established.
• If more than one device paired with the unit
is being played back, sound will be heard
from just one of those devices.
Terminate the Bluetooth connection by
any of the operations listed below.
• Operate the Bluetooth device to
terminate the connection. For details,
refer to the operating instructions
supplied with the device.
• Turn off the Bluetooth device.
• Turn off the system.
Tips
Notes
Finishing the Bluetooth
connection