Filter
Top Products
26
US
and pairing is performed automatically,
as described below.
1 Place the system and a
Bluetooth device within 1 m.
2 Press INPUT +/– to select “BT
AU.”
3 Set the Bluetooth device in
pairing mode.
For details on setting the Bluetooth
device in pairing mode, refer to the
operating instructions supplied with
the device.
4 When the detected devices are
listed on the Bluetooth device,
check that “HT-CT260” is listed.
On some Bluetooth devices, the list
may not be displayed.
5 Select “HT-CT260” on the list of
devices detected on the
Bluetooth device.
If entering the Passkey is requested,
enter “0000.”
6 Make the Bluetooth connection
on the Bluetooth device.
When the Bluetooth connection is
made correctly, the (Bluetooth)
indicator lights in blue and the
pairing information is stored in the
system.
•Use a Bluetooth device such as Bluetooth
mobile phone in an easily visible place in the
same room where the Sound Bar is placed.
• If Wi-Fi equipment is used, Bluetooth
communication may become unstable. In
that case, use the Bluetooth device as close as
possible to the Sound Bar.
• Sound may be interrupted because of a
problem with the Bluetooth device.
TV VOL TV CH
INPUT
+/–
Notes