Filter
Top Products
GB
7
Chapter 2:
the CD
Player
Chapter 2: the CD Player
Playing a CD (normal
play)
You can play CDs in four modes: normal,
shuffle, programme and repeat. The mode
determines which tracks (songs) to play, in
which order and whether or not they will
repeat.
Also, you can play 12 cm and 8 cm CDs.
When you play an 8-cm CD, place it
without an adaptor on the inner circle of
the disc tray.
Before you play the CD, decrease the sound
level by pressing VOL –. This will prevent
damage to the speakers.
1 Press POWER.
2 Press 6 (open/close) and place a CD on
the CD tray.
3 Press ^ (play) (or ( on the remote).
The disc tray closes and the first track
starts playing.
4 Press VOL + or – to adjust the sound
level.
To
Stop play
Pause
Remove the CD
* Remote
One Touch Play feature
Press ^ (or ( on the remote) when the
power is off or you are listening to another
source.
As long as a CD is in the player, you will be
able to listen to the CD without pressing any
other buttons.
To find the beginning of a track –
Automatic Music Sensor (AMS)
You can locate the beginning of a track
while the track is playing or while it is in
pause mode.
To locate the beginning of the current or
preceding track, press =0 (or = on
the remote) until you find the desired track.
To locate the beginning of the succeeding
track, press )+ (or + on the remote)
until you find the desired track.
To find a point in a track
You can find a particular point in a track
while playing or pausing a CD. Use the
buttons on the player to operate this
feature. This operation is not possible with
the remote.
To Search
Forward while
listening
Backwards
while listening
Quickly
without
listening while
checking the
playing time in
the display
Note
If the CD reaches the end while you are
searching quickly without listening,
"OVER"appears in the display. Press =0
(= on the remote) to go back.
To check the total number of tracks
and total playing time
Press DISPLAY on the remote while the
player is in stop mode.
The indications appear for a few seconds.
To check the remaining time
Press DISPLAY on the remote repeatedly
while playing a CD.
Each time you press DISPLAY, the display
changes as follows.
Current track number and
playing time
v
Current track number and
remaining time on the track
v
Remaining time on the CD
Playing a CD (normal play)
Playing Tracks in Random
Order (shuffle play)
Playing Tracks in the
Desired Order
(programme play)
Playing Tracks Repeatedly
(repeat play)
Operation
Hold down )+
and release it at the
desired point.
Hold down =0
and release it at the
desired point.
Hold down )+ or
=0 during pause
and release it at the
disired point.
12
4505
Total playing
time
Total number
of tracks
Z
Tuner CD player
1
2
3
4
p
with the label side up
1
003
Press
p
^ (or P*)
To resume play, press
here again.
6