Filter
Top Products
DR-BT21iK [US, ES] 3-280-325-52(1)
22
US US
DR-BT21iK [US, ES] 3-280-325-52(1)
US US
5
Press and hold the power button of the transmitter for about 7
seconds or more to enter “Pairing in process.”
Aer about 1 second, the transmitter indicator will ash twice,
but keep pressing the power button.
Notes
When rst power on the transmitter aer initialized, the transmitter will
enter “Pairing in process” automatically.
e pairing information is initialized if you press and hold the power button
for 15 seconds. e transmitter indicator lights up for 5 seconds before the
initialization starts. Release the button immediately when the transmitter
indicator lights up.
When the transmitter indicator ashes quickly, stop pressing.
e transmitter enters “Pairing in process.”
e transmitter indicator status will vary as follows, and pairing
is established with the Bluetooth receiving device.
e transmitter indicator ashes quickly: Pairing in process
e transmitter indicator ashes (at about 1-second intervals)
when responding to the Bluetooth receiving device: Connectable
(Pairing successful)
e transmitter indicator ashes (at about 5-second intervals):
Connected
Notes
“Pairing in process” of the transmitter is released aer about 5 minutes. If
pairing is not established within about 5 minutes, repeat the above
procedure from step
4
. iPod backlight may turn on in this 5 minutes.
To enter “Pairing in process,” you need to turn o the power of the
transmitter rst.
When not completed pairing
Repeat the procedure from step
2
.