Filter
Top Products
DR-BT21iK [US, ES] 3-280-325-52(1)
20
US US
DR-BT21iK [US, ES] 3-280-325-52(1)
US US
Controlling an iPod with the headset
You can control an iPod (see page 3 for compatible iPod models)
using the control button of the headset.
Before starting remote control operation, check that step 1 and 2 of
“Listening to music of the iPod” are completed (page 18).
Transmitter
Remote control
(playback, pause, etc.)
Bluetooth headset
Control for the iPod
You can playback or pause the iPod by pressing the button on
the headset.
You can turn o the iPod and transmitter by pressing and holding
the button on the headset for more than 2 seconds.
Control music
You can skip forward or backward each song on the iPod by pressing
the / button. You can also fast-forward or fast-rewind
songs by holding down the / button.
Notes
Even if you control the volume on the iPod, the volume of the headset does not change.
When operating the iPod by remote control, do not cover the transmitter with your hands,
etc.
You may need to press the play/pause button twice depending on the Bluetooth receiving
device.
You may need to press the play/pause button of the Bluetooth receiving device twice when
you operate the button on the iPod.
Operation of the iPod with the transmitter by the Bluetooth receiving device will vary
depending on the Bluetooth receiving device’s specication.
When the iPod is playing a video or photo, remote control operation may become
unstable.
Tip
When you press the pause button
on the Bluetooth receiving device,
the iPod goes to pause mode for 10
minutes and the iPod backlight is
turns on and o at interval.
Do not cover the
transmitter with hands.