Filter
Top Products
12
Recording a CD on
an MD
— CD-MD Synchro Recording
You can make a digital recording of a CD on
an MD, marking track numbers in the same
sequence as the original CD. If you use a
recorded MD, the MD deck automatically
locates the end of the recorded potion and
starts recording from there. You can also
record a programme of favorite tracks (see
page 29).
To turn on the system, press POWER.
Playing a CD (continued)
Tips
•You can start playing from the desired track in
step 2.
1 Press MD/CD =0 or )+ repeatedly
until you find the desired track.
2 Press CD ·∏.
•Pressing CD ·∏ (or CD · on the remote) when
the power is off automatically turns the power on
and starts CD play if there is a CD on the disc tray
(One Touch Play).
•If there is a CD on the disc tray, turn the power on.
The CD indicator is lit red.
•You can switch from another source to the CD
player and start playing a CD by pressing CD
·∏ (or CD · on the remote) (Automatic
Source Selection).
•If there is no CD in the player, “CD NO DISC”
appears in the display.
Notes
•Do not use a CD with tape, seal or paste, on it as
this may damage of the CD player.
•Do not push the disc tray closed, as this may
damage the unit. Press CD §, to close the disc
tray.
1 Insert a recordable MD.
With the
label side up
and the
shutter slide
rightward.
With the
arrow
pointing
toward the
deck.
MD π
1
2,3
5
4
POWER
MD
indicator
MD §