Filter
Top Products
Other Operations
73
GB
Enjoying the sound at low
volume
x NIGHT MODE
In this mode, you can enjoy sound effects or
dialogue as you would in a movie theater, even
at a low volume. It is useful for watching movies
at night.
Press NIGHT to select “NIGHT ON” in the
front panel display.
x AUDIO DRC
Narrows the dynamic range of a Dolby Digital
sound track. Useful for watching movies at low
volume late at night.
1 Press AMP MENU.
2 Press x/X repeatedly until “AUDIO DRC”
appears in the front panel display, then
press ENTER or c.
3 Press x/X to select the setting.
• DRC OFF: no compression of dynamic
range.
• DRC STD: reproduces the sound track with
the kind of dynamic range that the recording
engineer intended.
• DRC MAX: compresses dynamic range
fully.
4 Press ENTER or AMP MENU.
The AMP menu turns off.
• AUDIO DRC only applies to Dolby Digital sources.
You can enjoy the sound of other components
with this system. Connect the satellite receiver
or components with a high audio output level
(including 2V output components, such as MD
decks, etc.) to the VIDEO 1/SAT 1 or VIDEO 2/
SAT 2 jacks, and perform the following to
prevent distortion occurring.
Refer to the operation manual supplied with the
components for further information on their
operation.
Lowering the input sensitivity
of the VIDEO 1/SAT 1 jack
1 Press FUNCTION repeatedly until
“VIDEO1” appears in the front panel
display.
If “SAT1” appears, the lower input
sensitivity is already set and the following
steps are unnecessary.
Each time you press FUNCTION, the
system mode changes in the following
sequence:
DVD t FM t AM t VIDEO1 (SAT1)
t VIDEO2 (SAT2) t TV t DVD t
….
2 Press AMP MENU.
Note
Enjoying the Sound of
Other Components
FUNCTION
AMP MENU
With cover opened.
X/x/c
ENTER
continued