Filter
Top Products
Getting Started
27
GB
B To connect the S VIDEO OUT jack of other component to the S VIDEO
IN jack of this system
Connect a VCR or other component to the S VIDEO IN jack using an S video cord (not supplied).
Connecting the audio cords
The quality of the audio increases from
to ,
.
To connect the AUDIO OUT jacks of other component to the AUDIO
IN jacks of this system
Connect a VCR or other component to the AUDIO IN jacks using an video/audio cord (not supplied).
When connecting the cords, be sure to match the color-coded sleeves to the appropriate component
jacks.
To connect the COAXIAL DIGITAL OUT jack of a component to the
COAXIAL DIGITAL IN jack of this system
Connect the component to the COAXIAL DIGITAL IN jack using a coaxial digital cord (not supplied).
To connect the OPTICAL DIGITAL OUT jack of a component to the
OPTICAL DIGITAL IN jack of this system
Connect the component to the OPTICAL DIGITAL IN jack using a optical digital cord (not supplied).
• Make sure that the connected jack combinations are correct; if you connect the audio cords to VIDEO 1/SAT 1
AUDIO IN, you should connect the video cord to VIDEO 1/SAT 1 VIDEO IN/S-VIDEO IN.
• When you connect to the VIDEO 1/SAT 1 OPTICAL or COAXIAL DIGITAL IN jack, set the switch on the rear
panel accordingly.
Note
White (L/Audio)
Red (R/Audio)
DIGITAL IN
OPTICAL
COAXIAL
VIDEO 1 / SAT 1
continued