Filter
Top Products
28
GB
If you connect a digital satellite receiver with a DIGITAL OUT (COAXIAL
or OPTICAL) jack
The digital satellite receiver can be connected to the VIDEO 1/SAT 1 OPTICAL or COAXIAL
DIGITAL IN or VIDEO 2/SAT 2 COAXIAL DIGITAL IN jack instead of the VIDEO 1/SAT1 or
VIDEO 2/SAT2 AUDIO IN jacks of the system.
The system can accept both the digital and analogue signals. Digital signals have priority over analogue
signals. If the digital signal ceases, the analogue signal will be processed after 2 seconds.
If you connect a digital satellite receiver without a DIGITAL OUT jack
Connect the digital satellite receiver to the VIDEO 1/SAT1 or VIDEO 2/SAT2 AUDIO IN jacks only
of the system.
• The DIGITAL OUT jack outputs audio signals only when DVD function is selected (by pressing FUNCTION
repeatedly until “DVD” appears in the front panel display). (CDs, DVDs only)
• When you play a DVD, connected components that do not accept Dolby Digital, DTS, etc., may cause noise.
Note