Filter
Top Products
76
GB
You can enjoy multiplex broadcast sound when
the system receive the AC-3 multiplex broadcast
signal.
You can play bilingual broadcasts recorded on
DVD-RWs in VR mode.
• To receive the AC-3 signal, you need to connect a
digital satellite tuner to the system with an optical
cable or coaxial cable (page 28) and set the digital
output mode of the digital satellite tuner to AC-3.
1 Press AMP MENU.
2 Press x/X repeatedly until “DUAL
MONO”
appears in the front panel
display, then press ENTER or c.
3 Press x/X to select the sound you
want.
• MAIN: main sound is output from the left
and right speakers.
• SUB: sub sound is output from the left and
right speakers.
• MAIN+SUB: main sound and Sub sound
are output from the left and right speakers.
• MAIN/SUB: main sound is output from
the left speaker and Sub sound is output
from the right speaker.
4 Press ENTER or AMP MENU.
The AMP menu turns off.
Presetting radio stations
You can preset 20 FM stations, and 10 AM
stations. Before tuning, make sure to turn down
the volume to minimum.
1 Press FUNCTION repeatedly until the
band you want appears in the front
panel display.
2 Press and hold TUNING + or – until the
auto scanning starts.
Scanning stops when the system tunes in a
station. “TUNED” and “ST” (for stereo
program) appear in the front panel display.
3 Press TUNER MENU.
4 Press C/X/x/c repeatedly until
“Memory?” appears in the front panel
display.
5 Press ENTER.
A preset number appears in the front panel
display.
Enjoying Multiplex
Broadcast Sound
(DUAL MONO)
Note
AMP MENU
X/x/c
ENTER
With cover opened.
Enjoying the Radio
TUNER
MENU
TUNING –/+
C/X/x/c
ENTER
FUNCTION
PRESET
–/+
VOLUME +/–
CLEAR
With cover opened.
TUNED ST
TUNED ST