Filter
Top Products
Advanced Settings and Adjustments
masterpage:Right
specdef v20060111
filename[G:\FM\Sony\0605\DAVX10_US\Source\3210565131\3210565131DAVX10\gb12adv.fm]
model name [DAV-X10]
[3-210-565-13(1)]
77
US
xThe measurement is OK.
Unplug the calibration mic, then select
[YES]. The result is implemented.
xThe measurement is not OK.
Follow the message, then select [YES] to
retry.
Note
• While the Auto Calibration function works:
– do not turn off the power.
– do not press any button.
– do not change the volume.
– do not change the function.
– do not load or eject a disc.
– do not unplug the calibration mic.
• Depending on the acoustics of the room, the
displayed distance may not represent the actual
distance.
To select the auto calibration
setting mode
You can select the auto calibration setting mode.
1 Press SYSTEM MENU.
2 Press X/x repeatedly until “A.CAL MODE”
appears in the front panel display, then
press or c.
3 Press X/x to select a setting.
The default setting is underlined.
• “A.CAL ON”: reflects the setting that is set by the
auto calibration.
• “A.CAL OFF”
: returns to the default speaker
setting, regardless of the speaker setting made by
the auto calibration function.
4 Press .
5 Press SYSTEM MENU.
The system menu turns off.
Note
• If “Setup A.CAL” appears in the front panel display,
perform [AUTO CALIBRATION]. For details, see
page 75.
• When you perform [AUTO CALIBRATION],
“A.CAL MODE” is set to “A.CAL ON”
automatically.
To adjust the subwoofer level
1 Press SYSTEM MENU.
2 Press X/x repeatedly until “SW LEVEL”
appears in the front panel display, then
press or c.
3 Press X/x to adjust.
Adjusts the subwoofer level (–6.0 dB – +6.0 dB, 0.5
dB increments).
The adjusted value appears in the front panel
display.
4 Press .
5 Press SYSTEM MENU.
The system menu turns off.
Note
• When you perform [AUTO CALIBRATION], the
subwoofer level setting is readjusted.
FRONT L :
FRONT R :
SUBWOOFER :
If OK, unplug calibration mic and select
“YES”.
YES
10 / ft 3.12m 0.0dB
1
4
11ft 3.35m + 0.5dB
11ft 3.35m + 1.0dB
Measurement complete.
NO
Check front speaker connection.
Retry?
YES
Measurement failure.
NO