Filter
Top Products
14
GB
Getting Started – BASIC –
6 Adjust the height of the speaker.
Loosen (but do not remove) the screws, adjust the height of the speaker, then secure the screws.
Adjust the speaker of one side, then adjust another speaker by checking lines as a guide.
Note
• When adjusting the height of the speaker, grasp the speaker so that the speaker does not fall.
7 Take up any speaker cord (and the speaker system cord*) slack.
Take up slack in the speaker cord (and the speaker system cord*) by pulling from the bottom of
the base and hook the speaker cord (and the speaker system cord*) in the cord clamp.
* Surround speaker (L) only.
Lines
Loosen 2 screws.
,
Post
In addition to the screws
secured in Step 3, secure
2 more screws. (Secure 4
screws in total.)
e.g., front speaker
Adjust the length of the cord.
Secure the speaker cord by
running it through the slot.
,
Bottom of the base
Cord clamp
e.g., front speaker