Filter
Top Products
78
GB
component that is connected to the AUDIO IN
jack on the front panel.
To prevent this, you can change the output level
of the sound from the AUDIO IN jack on the
front panel.
1 Press AMP MENU.
2 Press X/x repeatedly until “AUDIO
ATT” appears in the front panel
display, then press ENTER or c.
3 Press X/x repeatedly until “ATT ON”
appears in the front panel display.
The output level is changed.
When you select “ATT OFF” and press x,
this operation will be canceled.
4 Press ENTER or AMP MENU.
The AMP menu turns off.
You can enjoy multiplex broadcast sound when
the system receive the AC-3 multiplex broadcast
signal.
• To receive the AC-3 signal, you need to connect a
digital satellite tuner to the system with an optical
cable or coaxial cable (page 31) and set the digital
output mode of the digital satellite tuner to AC-3.
1 Press AMP MENU.
2 Press x/X repeatedly until “DUAL
MONO” appears in the front panel
display, then press ENTER or c.
3 Press x/X to select the sound you
want.
• MAIN: main sound is output from the left
and right speakers.
• SUB: sub sound is output from the left and
right speakers.
• MAIN+SUB: main sound and Sub sound
are output from the left and right speakers.
• MAIN/SUB: main sound is output from
the left speaker and Sub sound is output
from the right speaker.
4 Press ENTER or AMP MENU.
The AMP menu turns off.
Enjoying Multiplex
Broadcast Sound
(DUAL MONO)
Note
AMP MENU
X/x/c
ENTER