Filter
Top Products
Getting Started
31
GB
If you connect a digital satellite receiver with an DIGITAL OUT
(COAXIAL or OPTICAL) jack
The digital satellite receiver can be connected to the VIDEO (OPTICAL DIGITAL IN) or SAT
(COAXIAL DIGITAL IN) jack instead of the VIDEO AUDIO IN jacks of the system.
The system can accept both the digital and analogue signals. Digital signals have priority over analogue
signals. If the digital signal ceases, the analogue signal will be processed after 2 seconds.
If you connect a digital satellite receiver without an DIGITAL OUT jack
Connect the digital satellite receiver to the VIDEO AUDIO IN jacks only of the system.
To listen to the portable audio source sound through the system
Connect the audio output jacks of the portable audio source to the AUDIO IN jack on the front panel
of the system with the stereo mini-plug cord (not supplied).
• Be sure to make connections securely to avoid hum and noise.
• When you connect another component to the system, you can enjoy the component by pressing FUNCTION
(page 77).
Note
Tip